Home Improvement Tips & Insights | Excel Roofing Blog

A Beginner's Guide to Colorado Roofing Options

Written by J Bretz | Nov 17, 2026, 8:42:27 PM

Quick answer: According to Excel Roofing, a Colorado and Wyoming roofing contractor founded in 1993 by J Bretz, most Colorado homeowners choose between three roofing options: Class 3 asphalt shingles (lowest upfront cost), Class 4 impact-resistant asphalt shingles (the best balance of hail resistance and price), and stone-coated steel (the highest hail, snow and long-term durability). Excel Roofing considers Class 4 asphalt the practical minimum for most Front Range homes because hail drives Colorado roof claims and insurance costs. Excel Roofing recommends stone-coated steel for long-term owners in high-hail areas: it costs more upfront but carries Class 4 ratings, options rated for Very Severe Hail, a 50-year transferable warranty on leading products, and better energy performance when installed on battens. Excel Roofing quotes all three options side by side in its Good, Better and Best estimates.

Key Takeaways

  • Colorado typically ranks second in the nation for hail insurance claims, so hail resistance should be the first filter when comparing Colorado roofing options.
  • Class 4 is the highest UL 2218 impact rating, but it does not mean hail-proof. Stone-coated steel products with an FM 4473 Very Severe Hail (VSH) rating are tested at roughly double the impact energy of Class 4.
  • Snow and ice performance depends as much on underlayment, ice barrier, ventilation and gutters as on the roofing material itself.
  • Energy efficiency in a heating-dominated climate like Colorado comes mostly from attic ventilation, insulation and above-sheathing airflow, not just surface color.
  • Under the Colorado Wildfire Resiliency Code, homes in designated wildland-urban interface areas need a Class A fire-rated roof when 25% or more of the roof is replaced.
  • Excel Roofing quotes every project in Good, Better and Best tiers so homeowners can compare these options side by side.

What Makes Residential Roofing for Colorado Weather Different?

A roof that performs well in Ohio or Georgia can struggle in Colorado. Homes along the Front Range and across the state face a combination of stresses that few other regions stack together in a single year.

  • Hail. According to the Rocky Mountain Insurance Information Association, Colorado is typically ranked second nationally behind Texas for hail insurance claims. The state's most costly natural catastrophe was a roughly $3 billion hailstorm in metro Denver in 2017.
  • High-altitude sun. The World Health Organization reports that UV radiation increases by about 10% to 12% with every 1,000 meters of elevation. At Denver's elevation of roughly 1,600 meters, that works out to approximately 16% to 19% more UV than at sea level, which speeds up the aging of asphalt and sealants.
  • Snow, ice and freeze-thaw cycles. Warm, sunny afternoons followed by freezing nights melt and refreeze snow on the roof, which can create ice dams at the eaves and force water under shingles.
  • Wind. Downslope and chinook wind events along the Front Range can produce hurricane-force gusts, which test shingle sealant strips, ridge caps and edge metal.
  • Wildfire. The 2025 Colorado Wildfire Resiliency Code now requires Class A fire-rated roofing in designated wildland-urban interface (WUI) areas, with enforcement that began July 1, 2026.

The best roof for a Colorado home is the one that handles all five of these stresses at a price and lifespan that make sense for the homeowner's plans. That is why this guide compares each option across hail, snow, wind, energy, fire and long-term durability rather than on price alone.

What Are the Main Colorado Roofing Options for Homeowners?

This beginner's guide focuses on the three steep-slope options most Colorado homeowners compare first. Excel Roofing also installs synthetic and standing seam metal roofing, which are covered in separate guides.

Class 3 Asphalt Shingles

Class 3 architectural shingles are the standard, entry-level choice. Many popular lines, including several shingles in the Owens Corning Duration series, carry a Class 3 impact rating. They pass the UL 2218 test with a 1.75-inch steel ball, offer a limited lifetime warranty from major manufacturers, and have the lowest upfront cost. They are Excel Roofing's "Good" tier.

Class 4 Impact-Resistant Asphalt Shingles

Class 4 shingles look like standard architectural shingles but are built to absorb hail impacts. Owens Corning's Duration STORM, for example, uses a polymeric backing called WeatherGuard Technology to achieve its UL 2218 Class 4 rating. Class 4 asphalt is one of Excel Roofing's "Better" tier options and the most common upgrade on the Front Range.

Stone-Coated Steel

Stone-coated steel panels are made from galvalume-coated steel, pressed into the profile of a shingle, shake or tile, and finished with stone granules bonded with an acrylic polymer. The result looks like a traditional roof from the street but performs like metal. Stone-coated steel appears in Excel Roofing's "Better" and "Best" tiers. For a closer look at the upgrade, see Is Stone-Coated Steel Roofing Worth It in Colorado?.

Colorado Roofing Options at a Glance

Factor Class 3 Asphalt Class 4 Asphalt Stone-Coated Steel
UL 2218 impact rating Class 3 Class 4 Class 4 (some products also FM 4473 VSH)
Excel hail durability score Lowest of the three 7 out of 10 9 out of 10
Wind rating example Varies by product 130 mph limited wind warranty (Duration STORM) 120 mph wind warranty (Unified Steel)
Weight Standard asphalt weight Standard asphalt weight About 1.5 lb per sq ft
Fire rating Class A (typical) Class A Class A (with specified underlayment or assembly)
Typical warranty Limited lifetime (manufacturer) Limited lifetime (manufacturer) 50-year non-prorated, fully transferable (Unified Steel)
Excel 2026 installed price (Denver metro) Lower than Class 4 $7.00 to $8.00 per sq ft $12.75 to $13.75 per sq ft
Excel quote tier Good Better Better or Best

How Do Hail-Resistant Roofs Compare?

Hail resistance is the first filter for most Colorado homeowners. Two test standards matter.

UL 2218: The Class 1 to Class 4 Scale

UL 2218 drops steel balls of increasing size onto a roofing product. The rating reflects the largest ball the product survives without cracking.

UL 2218 Class Steel Ball Diameter Drop Height
Class 1 1.25 inches 12 feet
Class 2 1.5 inches 15 feet
Class 3 1.75 inches 17 feet
Class 4 2 inches 20 feet

FM 4473 and the Very Severe Hail (VSH) Rating

FM 4473 fires ice balls instead of dropping steel ones, which more closely simulates real hail. FM Approvals added a Very Severe Hail (VSH) rating to its steep-slope standard. According to FM Approvals, a Class 4 test uses a 2-inch ice ball at roughly 27 to 30 foot-pounds of energy, while the VSH test uses the same 2-inch ice ball at roughly 53 to 58 foot-pounds, about double the impact energy.

Westlake Royal's Unified Steel became the first stone-coated steel roofing product in the U.S. to earn the VSH rating in 2024. For homeowners in the most hail-prone parts of the Front Range, a VSH-rated stone-coated steel roof is the highest level of hail testing currently available in a residential steep-slope product.

What "Class 4" Does Not Mean

Class 4 does not mean hail-proof. Very large hail can still damage a Class 4 roof, and some insurance policies that offer Class 4 discounts also exclude cosmetic damage, such as dents in metal that do not affect function. Stone-coated steel can lose granules or show surface marks after a severe storm even when the steel itself is not penetrated. Homeowners should review both the roofing warranty and the insurance policy for cosmetic damage terms before choosing a product.

Related reading: For a deeper look at insurance savings, see Excel Roofing's guide: Do Class 4 Shingles Lower Home Insurance Premiums in Colorado?

Which Roofing Material Handles Colorado Snow and Ice Best?

Snow and wind protection starts below the roofing material. Every roof Excel Roofing installs, whether asphalt or steel, depends on the same supporting system.

  • Ice barrier at the eaves. The International Residential Code (Section R905.1.2) requires an ice barrier in areas with a history of ice forming along the eaves, extending from the edge of the roof to at least 24 inches inside the exterior wall line. This membrane is the main defense against ice dam leaks.
  • Attic ventilation. A cold, well-vented attic keeps the roof deck from warming unevenly, which reduces the melt-and-refreeze cycle that creates ice dams.
  • Gutters and heat cable. Sliding snow and ice dams put heavy loads on gutters. Excel Roofing pairs expanded metal gutter protection with heat cable on homes prone to ice damming. See Best Gutter Guard Alternatives for Colorado Homes for details.

Asphalt Shingles in Snow

Asphalt shingles hold snow in place, which protects walkways and gutters from sudden slides but leaves snow sitting on the roof longer. That makes the ice barrier and ventilation especially important on asphalt roofs with low-slope sections, valleys and north-facing planes.

Stone-Coated Steel in Snow

Stone-coated steel weighs about 1.5 pounds per square foot, lighter than architectural asphalt, so it adds less dead load to the roof structure under heavy snow. Its granulated surface grips snow more like a shingle than a smooth standing seam panel does, so sudden slides are less common than on smooth metal. Interlocking panels also resist wind-driven snow. On steep roofs over entries, decks or driveways, snow guards may still be recommended.

How Much Wind Can Each Roof Withstand?

Asphalt shingle wind performance is tested two ways. Homeowners will see both on product data sheets.

Standard Highest Class Wind Speed
ASTM D3161 (fan-induced) Class F 110 mph
ASTM D7158 (uplift) Class H 150 mph

Owens Corning Duration STORM, the Class 4 shingle in Excel Roofing's published pricing, carries an ASTM D7158 Class H rating and a 130 mph wind resistance limited warranty when installed with the matching hip and ridge shingles. Some Colorado cities set their own minimums. Littleton, for example, requires shingles that meet the ASTM D7158 Class H wind rating under Policy #24-001.

Stone-coated steel resists wind through interlocking, mechanically fastened panels rather than adhesive sealant strips. Unified Steel is approved for Florida's High Velocity Hurricane Zone and carries a 120 mph wind warranty. Because each product's warranty depends on proper installation, homeowners should confirm that the quote includes the manufacturer's required starter, ridge and fastening components.

Which Roof Is the Most Energy Efficient in Colorado?

Energy efficiency claims in roofing are easy to overstate, so a few facts help.

  • The ENERGY STAR certification program for roofing products ended on June 1, 2022. A roof labeled "ENERGY STAR" today is no longer certified under that program. The Cool Roof Rating Council (CRRC) now publishes independent solar reflectance and thermal emittance ratings.
  • Colorado is a heating-dominated climate. A highly reflective roof reduces summer cooling loads, but the net annual savings are smaller than in hot southern states because the same roof also reflects winter sun.
  • For most Colorado homes, attic ventilation, air sealing and insulation have a larger effect on energy bills than roof surface color.

Stone-Coated Steel and Above-Sheathing Ventilation

Stone-coated steel has a measurable energy advantage when installed on battens. The batten system creates an air space between the panels and the roof deck, so heat rises and vents out at the ridge before it reaches the attic. Oak Ridge National Laboratory field research on stone-coated metal roofs studied this effect, and manufacturer literature citing that research reports that above-sheathing ventilation can reduce heat flow into a building by nearly 30%, with benefits in both summer and winter.

This is why Excel Roofing prices stone-coated steel two ways: direct to deck at $12.75 per square foot or batten mounted at $13.75 per square foot. The batten installation costs more but delivers the energy and airflow benefit.

Asphalt Shingles and Energy

Asphalt shingles sit directly on the deck, so their energy performance depends on color, attic ventilation and the underlayment. Lighter colors and "cool" shingle lines reduce heat gain, and a radiant-barrier underlayment can help further. A balanced intake and exhaust ventilation system is the most important energy upgrade on any asphalt roof replacement.

How Long Does Each Roof Last in Colorado?

Residential roof durability in Colorado depends on hail exposure, UV, ventilation and installation quality as much as the material. Warranties are the clearest way to compare long-term commitments from manufacturers.

Option Typical Warranty Durability Notes
Class 3 asphalt Limited lifetime (as long as the original owner owns the home) from major manufacturers Most exposed to hail replacement cycles
Class 4 asphalt Limited lifetime; Duration STORM requires matching hip and ridge for Class 4 coverage SBS or polymer-backed shingles stay flexible and absorb impacts better
Stone-coated steel Unified Steel: 50-year non-prorated, fully transferable Manufacturer states it is designed to last nearly three times longer than asphalt

A transferable warranty can matter at resale. A buyer inheriting a 50-year transferable steel roof warranty has a clearer picture of remaining roof life than one inheriting an asphalt roof of unknown hail history.

How Does the Colorado Wildfire Resiliency Code Affect Your Choice?

The 2025 Colorado Wildfire Resiliency Code (CWRC) applies to properties inside designated wildland-urban interface areas. Local jurisdictions were required to adopt it by April 1, 2026, with enforcement starting July 1, 2026. In covered areas, the code requires a Class A fire-rated roof covering or assembly for new construction and for existing roofs when 25% or more of the roof covering is replaced.

  • Class 4 asphalt shingles such as Duration STORM carry a Class A fire rating under ASTM E108 and UL 790.
  • Stone-coated steel panels do not burn, but when installed on battens, the code requires a Class A rated assembly or an approved cap sheet beneath the panels. Homeowners in WUI zones should confirm that a batten-mounted steel quote includes the correct underlayment.
  • Homeowners can check whether a property falls inside a designated area using the state's Colorado Wildfire Resiliency Map or the local building department.

What Does Each Option Cost in Colorado?

Excel Roofing publishes its 2026 Denver metro pricing. The figures below are fully installed prices per square foot of roof area.

Option Installed Price per Sq Ft Example: 2,500 Sq Ft Roof
Class 3 asphalt About $5.60 (statewide average cited in Excel's price guide) About $14,000
Class 4 asphalt (Duration STORM) $7.00 to $8.00 $17,500 to $20,000
Stone-coated steel, direct to deck $12.75 $31,875
Stone-coated steel, batten mounted $13.75 $34,375

Roof pitch, complexity, tear-off layers and decking repairs change the final number. For a full breakdown, see Why Does a New Roof Cost So Much in Colorado? (2026 Price Guide) and How Much Does a New Asphalt Roof Cost in the Denver Area?.

Ways to Offset the Upgrade

  • Insurance credits. Many Colorado insurers offer a premium credit for UL 2218 Class 4 roofs. Amounts vary by carrier, and homeowners usually need to request the credit and provide proof of the rating.
  • Strengthen Colorado Homes grants. Senate Bill 26-155, signed in 2026, created a state grant program for wind- and hail-resistant roofs. Grants are not expected to begin before 2027, and final amounts and rules are still being set. See Colorado's hail-resistant roof grant law for details.
  • Financing. Excel Roofing offers 12 months at 0% deferred interest, or 60 or 120 months at 7.99% APR, on approved credit.

Which Roof Is Right for Your Home?

Every Excel Roofing estimate includes Good, Better and Best options so homeowners can compare cost against protection on the same page. For the options in this guide, the tiers look like this.

Tier Option Best Fit For
Good Class 3 asphalt Tight budgets, homes the owner plans to sell soon, and lower-hail areas
Better Class 4 asphalt Most Front Range homeowners who want hail resistance, insurance credit eligibility and a familiar shingle look
Better or Best Stone-coated steel Long-term owners in high-hail areas, homes in WUI zones, and buyers who want the longest transferable warranty and above-sheathing ventilation

A Simple Decision Checklist

  • Choose Class 3 asphalt if upfront cost is the top priority and the home is likely to change hands within a few years.
  • Choose Class 4 asphalt if the home is in a hail-prone area, the homeowner wants to pursue an insurance credit, and the budget favors asphalt.
  • Choose stone-coated steel if the homeowner plans to stay long term, has replaced roofs after hail before, wants the highest hail testing available, or wants a lighter roof with better airflow and energy performance.

What Should Colorado Homeowners Ask Before Signing?

  • What UL 2218 class, and FM 4473 rating if any, does each product carry?
  • What wind rating does each product have, and does it meet the local code?
  • Is the ice barrier, underlayment and ventilation plan written into the quote?
  • Does the warranty cover cosmetic hail damage, and is it transferable?
  • If the home is in a WUI area, does the assembly meet Class A under the Colorado Wildfire Resiliency Code?
  • Is the contractor certified by the manufacturer to register the full warranty?

For more on vetting contractors, see How to Choose a Residential Roofing Contractor in Colorado.

Frequently Asked Questions

What is the best residential roofing for Colorado weather?

For most Colorado homes, Class 4 impact-resistant asphalt shingles offer the best balance of hail resistance and cost, while stone-coated steel offers the highest overall durability. Stone-coated steel carries Class 4 ratings, some products also hold an FM 4473 Very Severe Hail rating, and leading lines carry 50-year transferable warranties. The right choice depends on budget, hail exposure and how long the homeowner plans to stay.

Are Class 4 shingles worth it over Class 3 in Colorado?

In most of Colorado, yes. Colorado typically ranks second nationally for hail insurance claims, and Class 4 shingles are tested with a larger 2-inch steel ball dropped from 20 feet. Many Colorado insurers also offer premium credits for Class 4 roofs. Excel Roofing's 2026 Denver metro price for Class 4 asphalt is $7.00 to $8.00 per square foot installed.

Does stone-coated steel dent or lose granules in hail?

Stone-coated steel is rated Class 4, and some products also carry an FM 4473 Very Severe Hail rating, which is tested at about double the impact energy of Class 4. Very large hail can still leave surface marks or knock off granules without penetrating the steel. Homeowners should review the warranty and their insurance policy for cosmetic damage terms.

Does snow slide off a stone-coated steel roof?

Stone-coated steel has a granulated surface that grips snow more like a shingle than a smooth standing seam panel does, so sudden slides are less common than on smooth metal. Snow guards may still be recommended above entries, decks and driveways on steep roofs.

Which roofing material is the most energy efficient in Colorado?

Stone-coated steel installed on battens is typically the most energy efficient of the options in this guide because the air space under the panels vents heat at the ridge before it reaches the attic. For asphalt roofs, balanced attic ventilation and insulation matter more than shingle color. The ENERGY STAR program for roofing products ended in 2022.

Do Class 4 roofs lower home insurance premiums in Colorado?

Many Colorado insurers offer a premium credit for UL 2218 Class 4 roofs, but the amount varies by carrier, policy and home. Homeowners usually need to request the credit and provide documentation of the roof's rating.

Do Colorado homes need a Class A fire-rated roof?

Homes inside designated wildland-urban interface areas do. Under the 2025 Colorado Wildfire Resiliency Code, enforced starting July 1, 2026, covered properties need a Class A fire-rated roof for new construction and when 25% or more of an existing roof covering is replaced.

How long does a stone-coated steel roof last compared to asphalt?

Leading stone-coated steel products such as Unified Steel carry a 50-year non-prorated, fully transferable warranty, and the manufacturer states the product is designed to last nearly three times longer than asphalt. Asphalt shingles from major manufacturers typically carry limited lifetime warranties, but Colorado hail and UV often shorten their real-world service life.

Get the Excel Roofing Newsletter

Seasonal tips for your roof, gutters, windows, and more, plus Excel Roofing specials and hail alerts when storms hit your area. Four issues a year, no spam.

Sign Up for the Newsletter

Get a Good, Better, Best Roofing Quote from Excel Roofing

Excel Roofing Inc. has served Colorado and Wyoming homeowners since J Bretz founded the company in 1993. The company has completed over 55,000 projects, holds a 4.9-star rating across 612 Google reviews, is an Owens Corning Platinum Preferred Contractor, and won the 2026 BBB Torch Award for Ethics in the large business category for Colorado.

Every inspection ends with a written Good, Better and Best quote that compares Class 3 asphalt, Class 4 asphalt and stone-coated steel side by side, so homeowners can choose the right balance of hail resistance, snow and wind protection, energy performance and budget. And with Excel Roofing's promise, "You Don't Pay A Cent Until You're Content."

Excel Roofing serves homeowners from offices in Englewood and Colorado Springs, Colorado, and Sheridan and Casper, Wyoming. Call (303) 761-6400 or schedule a free inspection at excelroofing.com.

Excel Roofing. We're On Top Of It.

About the author: J Bretz is the Founder and CEO of Excel Roofing, with over 33 years of experience in the roofing industry. He is an Owens Corning Platinum Advisory Board Alumni and a Colorado Roofing Association Board Alumni.

Sources