Quick answer: Excel Roofing's published 2026 Denver metro pricing, a Class 4 impact-resistant asphalt shingle roof costs $7 to $8 per square foot installed, or $700 to $800 per roofing square, which is about $17,500 to $20,000 for a 2,500-square-foot roof. Basic shingles without an impact rating average closer to $5.60 per square foot statewide. Costs run higher than homeowners expect because of Colorado's hail, steep roofs built for snow, local building codes, impact-rated materials, labor demand after storms, and rising material prices.
The table below shows Excel Roofing's published 2026 Denver metro pricing for the roofing systems it recommends most often in Colorado. Every price is fully installed, including tear-off and disposal. One roofing square equals 100 square feet.
| Roofing system | Impact rating | Per sq ft | Per square |
|---|---|---|---|
| Owens Corning Duration Storm IR (asphalt) | Class 4 | $7.00 to $8.00 | $700 to $800 |
| Stone-coated steel (direct to deck) | Class 4 | $12.75 | $1,275 |
| Stone-coated steel (batten mounted) | Class 4 | $13.75 | $1,375 |
| Concrete tile | Class 4 | $12.75 | $1,275 |
| Standing seam metal (1.5-inch snap lock) | Class 4 | $13.50 | $1,350 |
For comparison, the statewide 2026 average for architectural asphalt shingles without a Class 4 rating is about $5.60 per square foot ($560 per square), according to Roof Observations' Colorado cost guide. In Colorado's hail, many homeowners find the Class 4 upgrade pays back through insurance credits and fewer claims.
Roof area is larger than a home's floor area because of pitch and overhangs, so these totals use the size of the roof itself, at Excel Roofing's published pricing.
| Roofing system | 20 squares (2,000 sq ft) | 25 squares (2,500 sq ft) | 30 squares (3,000 sq ft) |
|---|---|---|---|
| Class 4 asphalt | $14,000 to $16,000 | $17,500 to $20,000 | $21,000 to $24,000 |
| Stone-coated steel (direct to deck) | $25,500 | $31,875 | $38,250 |
| Stone-coated steel (battens) | $27,500 | $34,375 | $41,250 |
| Concrete tile | $25,500 | $31,875 | $38,250 |
| Standing seam metal | $27,000 | $33,750 | $40,500 |
These are starting points, not quotes. A specific home can land above or below these numbers depending on the factors below. Excel Roofing's Colorado roofing material comparison covers how each system performs.
Colorado is one of the most hail-damaged states in the country, and hail is the top claim insurers pay here. After a major storm, thousands of homeowners need roofs at once, which strains crews and supply. Hail also pushes homeowners toward Class 4 impact-resistant materials, which cost more than standard shingles but hold up far better.
Snow loads lead many Colorado homes to have steeper pitches and more complex roof lines. Steep roofs take more time and more safety equipment to install, and steeper or more complex roofs can add up to 30% to the cost of a project.
Front Range cities are tightening roofing requirements. Littleton, for example, requires shingles that meet the ASTM D7158 Class H wind rating under Policy #24-001, and other Colorado communities are adopting Class 4 impact-resistant roofing ordinances. Code requirements protect homeowners but can raise the minimum product a contractor is allowed to install. Permits are also required for most replacements.
At Colorado's elevation, roofs take more UV exposure and wider daily temperature swings. That wear shortens the life of lower-grade materials and makes quality underlayment and ventilation more important, both of which add to the cost of doing the job right.
Skilled roofing labor is in short supply nationally, and Colorado's storm seasons make it worse. Material prices have also climbed. Federal tariffs on imported steel and aluminum reached 50% in 2025, which affects metal roofing, flashing, and gutters.
Some costs only appear once the old roof comes off. Replacing rotted or damaged decking typically runs $2 to $5 per square foot. A clear quote should explain how decking replacement will be priced before the job starts.
Two quotes with different totals are often for two different roofs. Before comparing price, homeowners should confirm each quote includes the items below. Excel Roofing's guide on how to choose a residential roofing contractor in Colorado covers the contractor side of the decision.
At Excel Roofing's published 2026 Denver metro pricing, a Class 4 asphalt shingle roof costs $7 to $8 per square foot installed ($700 to $800 per roofing square), or about $17,500 to $20,000 for a 2,500-square-foot roof. Stone-coated steel, concrete tile, and standing seam metal run $12.75 to $13.75 per square foot.
Colorado's hail, steep snow-load roofs, stricter local codes, high-altitude sun exposure, post-storm labor demand, and higher material prices all push costs up.
Insurance typically covers roof damage from a sudden event such as hail or wind, minus the deductible. It does not usually cover a roof that has simply worn out with age.
For most Colorado homes, yes. Class 4 roofs resist hail far better, and many insurers offer a premium credit that helps offset the higher upfront price.
Late summer and fall usually offer the most stable weather and better contractor availability. Spring and early summer overlap with hail season, when demand is highest.
Seasonal tips for your roof, gutters, windows, and more, plus Excel Roofing specials and hail alerts when storms hit your area. Four issues a year, no spam.
Excel Roofing has been replacing roofs in Colorado and Wyoming since 1993, with over 55,000 completed projects. As an Owens Corning Platinum Preferred Contractor, Excel Roofing provides itemized quotes with good, better, and best options so homeowners can see exactly what each price includes. Call (303) 761-6400 or use the online scheduler to book a free inspection. And with Excel Roofing, You Don't Pay A Cent Until You're Content.
Excel Roofing. We're On Top Of It.